1/30/25

The Rise of Catalytic Converter Thefts from Work Trucks / Premier Truck Center Finds Solution for Isuzu's

A concerning trend has emerged that has left many work truck owners scratching their heads in disbelief - the surge in catalytic converter theft from these vehicles. It seems that no work truck is safe from these brazen criminal acts, leaving professionals perplexed and frustrated. 

 

Why are catalytic converters becoming the prime target of thieves, specifically from work trucks?

 

               Read: The Rise of Catalytic Converter Thefts from Work Trucks HERE: 


  

                             Stolen Catalytic Converter Picture:


 



                                    Premier Cat Guard Installed:


 


 

ISUZU CAT GUARDS AVAILABLE  FROM PREMIER TRUCK CENTER

 

The Cat Guards from Premier Truck Center can be easily installed on your Isuzu protecting it from Catalytic Converter Theft.

 

These guards come packaged as a kit and can be easily installed in about one hour. They will be assembled around the Converter and provide a barrier that will make it virtually impossible to remove your Catalytic Converters!

 

Call 941-729-8196 and ask for Dylan

 

or email at sales@premiertrucksfl.com   

1/26/25

Texas Metal S07E12 '49 Ford Rust to Royalty


A while back, a customer asked Bill to rebuild a rusty '49 Ford truck as a gift for her dad. The team has given it their all to finish a one-of-one, hand-built masterpiece with a Coyote engine -- and one of the best presents a dad could ever imagine.

1/24/25

Liftgate Terminology




Above Floor Travel
On specific rail-type models, this option allows your cargo to travel above the  floor level of the truck or trailer based upon the bed height of your application.
Bed Height
The vertical distance from ground level  to the floor surface of the vehicle.
Bed Height Range
When specifying a liftgate, the lesser  dimension refers to the bed height when the vehicle is loaded to maximum weight capacity. The greater dimension refers to the bed height when the vehicle is empty.
Below-Bed-Height Storage
Option found on many railgate models that  allow the liftgate platform to be stored so  its highest point is below the bed height  of the vehicle, thus allowing unobstructed  access to the rear of the vehicle without  having to operate the liftgate.
Cart Stops
A device used to prevent wheeled cargo from rolling off the ramp end of the  liftgate platform.
Conventional Liftgate
A liftgate that is welded or bolted to  the frame of the vehicle chassis. In the  stored or travel position, the lifting  platform is in the vertical position at the rear of the vehicle.
Dock Bumpers
Optional protective steel structures used commonly with Flipaway models that are welded below bed level at the rear of  the vehicle to protect the liftgate from damage caused by loading dock impact. May have the capacity to also house the vehicle tail lights.
Flipaway Liftgate
A liftgate that is welded to the frame of  the vehicle chassis. The loading platform is designed with two or three folding  sections. In the stored or travel position, the platform is folded and stored beneath the body floor allowing access to the cargo area without activating the lift.
Cantilever Lift
A Cantilever liftgate is a self-adjusting platform that stays level relative to the truck bed throughout the entire raise and lower cycle. Options are also available to convert the platform to a dock board or for use as a rear door.
Gravity Open, Power Close
Hydraulic close, torsion spring/gravity open.
 
Galvanization
The process of applying a protective  zinc coating to steel or iron, in order  to prevent rusting.
Load Capacity
Maximum amount of cargo weight that a  given liftgate is rated to handle during one cycle. Full rated capacity is based on the cargo being centered on the platform as close to the vehicle as possible or the weight being evenly distributed over the entire platform surface.
Mount Frame Clearance
Distance required between the rear-most  obstruction on the chassis and the end  of the vehicle body in order to mount  a liftgate.
Power Open, Power Close
Hydraulic operation of the liftgate platform during the open and closing portion of  the cycle, which allows for consistent  opening and closing speed regardless  of the climate conditions.
Power Up, Gravity Down
Hydraulic operation raises the liftgate  platform, while its own weight lowers it.
Power Up, Power Down
Hydraulic operation of the liftgate platform during the raise and lower portion of the cycle, which allows for consistent lifting  and lowering speed, regardless of the climate conditions.
Rail-Type Liftgate
Medium / Heavy / Bottle Gas / Pick-Up / Service Body / Dump Thru

Railgates have vertical tracks that weld  or bolt to the rear frame of a truck body  or trailer. The loading platform travels up  and down on these tracks through the  use of cables or chains in conjunction  with a hydraulic cylinder, or the use of  two hydraulic cylinders directly attached to the loading platform. In the travel  position, the platform stores over the rear door, although an option is available to allow storage below the door. 

• Medium Rail-Type Liftgate
–   References the lift capacity. • Heavy Rail-Type Liftgate –   References the lift capacity. • Bottle Gas (BG) Rail-Type Liftgate –   Offers design features targeted    to the bottle gas delivery industry. 

Reduced Maintenance

Standard on all Waltco liftgate models,  independently or a combination of  fiberglass-reinforced Teflon™ bearings,  slide pads and grease zerks to allow  additional protection to the major pivot points on your liftgate.

Retention Rail
Railing around the platform perimeter  that supports and restrains bottled  gas cylinders during delivery. Used on  MDLBG, PTBG, RBGL and WDVBG Bottled Gas models.
 
Sideloader Liftgate
A liftgate that is typically mounted below the side door of a truck body or trailer  and can be either frame or body mounted, depending on the application. In the stored or travel position, the platform stores under the body and is either unfolded or extended out from under the door.
Snubber Kit
A structure consisting of a steel brace and a rubber bumper pad used commonly with Flipaway models. The snubber kit stabilizes the liftgate platform while in the transit  position, minimizing potential for damage due to bouncing and/or road vibration.
Torsion Bar Assist                              
Reduces platform opening and closing forces with the use of spring loaded  counterbalanced torsion bars or rods.

Source: Waltco Liftgates - https://www.hiab.com/en-US/waltco/

1/22/25

Towing Overview | Ford How-To | Ford


This informative video will help explain some of the features your vehicle may have that can help with towing a trailer.

1/20/25

Driving Defensively for CDL Drivers


This training video is for Commercial Drivers License CDL holders and teaches them how to drive defensively while operating big rig, semi trucks and other large delivery vehicles.

1/18/25

This Ford Super Duty Upgrade Won't Make Headlines...But It Can Be INSANELY Useful!


Ford Super Duty has an ace up its sleeve for working folks. The Ford Pro Upfit Integration System aims to make it easier for fleets to add accessories to the truck, and Andre covers how it all works at the 2023 Work Truck Show!


TFLnow

1/16/25

VMAC DTM70 & DTM70-H – How Do They Work?


This video provides an in-depth look at how VMAC’s DTM70 and DTM70-H direct-transmission mounted PTO-driven air compressors and multi-power systems operate. Discover the key components of the DTM70 and DTM70-H and see how these vehicle-integrated systems deliver air (DTM) or a combination of air and hydraulics (DTM70-H).





1/14/25

Cargo Van 3D Upfit Configurator


Build and price your cargo van or box trailer with our FREE easy to use 3D Configurator. Choose one of our popular trade packages or custom design your upfit from scratch.

1/12/25

GMC Certified Service—Tire Expertise | GMC


For those who are driven to bring their unmatched expertise and their GMC to every challenge, there are GMC Certified Service advisors and technicians who do the same. When you need tires, you don’t need a tire expert; you need a GMC expert. One who can recommend the perfect Original Equipment tires designed to meet your GMC’s Tire Performance Criteria—only from GMC Certified Service. Visit gmc.com/certified-service.


GMC

1/10/25

Flexible Municipal Fleet Financing | Customer Interview | Ford Pro™ FinSimple™



After the Woodbridge Township, New Jersey Mayor explains the unique vehicle needs of municipalities, the various payment options available to cities wanting to bundle fleet vehicle purchases with upfits are detailed by a Ford Pro FinSimple Municipal Finance Operations Specialist.


1/06/25

How to Flat-Tow Your Ford F-150 | Ford How-To | Ford


This informative video will explain how to set up your Ford F-150 to be flat-towed on all four wheels without causing damage to the gearbox or transmission.* *See your Owner's manual. Learn more about being a Ford owner here: http://ford.to/FordOwner

Ford Motor Company