3/31/20

Kargo Master Demonstrates Aluminum Drawer Units – NTEA Show


David demonstrated Kargo Master’s Aluminum Drawer Units. They’re 52 inches deep, light and right weighted, easy to assemble and easy to install. They yield a lower installed cost to the dealer. Innovative plastic tote holders finish this impressive set of store-all drawers. There is also an integrated wing kit which is a big-time saver as opposed to a bolt-on kit and is used by major rental truck fleets.

3/30/20

Peterbilt Trucks at the 2020 NTEA Work Truck Show


Medium Duty Marketing Manager, Phil Hall, walks us through the trucks on display in our Peterbilt booth at the NTEA Work Truck Show.

3/29/20

The Making of an American Truck | Exceptional Engineering


Exceptional Engineering: The Making of an American Truck
The Swedish automotive group Volvo has been producing trucks for the North American market since the late 1970s. Every ten minutes, a new truck rolls off the assembly line, with a tailor-made production line equipped to cater to individual customer requirements. More than 500 color tones are available for the cab paint job alone. After just one day in assembly, the new trucks are ready to roll on public highways throughout the United States provided they have successfully completed a test drive on the factory track.

3/28/20

NTEA Work Truck Show 2020 Transit Side by Side Optimization Demonstration


Vehicles idle.

Derive offers idle rpm reduction to reduce the amount of fuel consumed result in reduced operational costs of fuel and lowering CO2 emissions.

Most commercial fleets utilizing Derive Optimization are seeing 1-3 gallons savings per day per vehicle.

See more at www.derivesystems.com

3/27/20

3/26/20

CTECH at The Work Truck Show 2020 | SuperCut


Missed out on all the fun at The Work Truck Show? Don't worry; take a good look around the CTech booth and beyond with this supercut! We had our brand new Shelving Drawers and MotionLatch™ 'Full-Bank' lock on full display as well as a variety of Tool Drawers showcased in other areas of the show.

3/25/20

Former President George W. Bush Picks Jay Up In A 2013 Ford F150 King Ranch | Jay Leno's Garage


Catch former president George W. Bush take Jay for a ride in a Texas fan-favorite: a 2013 Ford F150 King Ranch! CNBC PRIME

3/24/20

General Motors Truck Production at the Fort Wayne Assembly Plant


General Motors is making a new round of upgrades to its Fort Wayne Assembly plant to further increase production of the all-new Chevrolet Silverado 1500 and GMC Sierra 1500 pickups – especially crew cab models.

“We are building Chevrolet and GMC crew cab pickups at record volume and mix levels to meet customer demand and the $24 million investment will allow us to build even more,” said Mary Barra, GM chairman and CEO. “The team here at Fort Wayne has done an outstanding job helping us satisfy customers throughout this launch. Our product ramp-up was very smooth and the quality has been exceptional. Crew cab sales have been very strong, and we are expanding customer choice with new models, more cab choices and innovative new powertrains.”

Combined sales of the Chevrolet Silverado 1500 and GMC Sierra 1500 crew cab pickups, which launched in the second half of 2018, were up 20 percent in the first quarter of 2019 versus a year ago. GM is projecting another significant increase for the second quarter. Customer deliveries of the double-cab models built in Fort Wayne began during the first quarter.

The $24 million will be invested to further enhance the plant’s conveyors and other tooling to support the increased production. The work will be completed this summer. With today’s announcement, GM has invested more than $1.2 billion in the plant since 2015.

Since 2009, GM has invested $23 billion in U.S. manufacturing – more than one-quarter of every dollar spent by automakers. SOURCE:
The Wheel Network
The Wheel Network

3/23/20

Turn Your Pickup Into a Dump Truck with a DumperDogg® Dump Insert


The slide-in DumperDogg Dump Insert from Buyers Products makes it easy to convert your 3/4 ton+ pickup with a 6 or 8 ft bed into a dump truck. The slide-in unit has a 6000 lb capacity and is powered by your truck's electrical. A double-acting scissor hoist provides up to a 45° dump angle. The versatile tailgate opens up or down and can be removed completely, so you can still use your truck like a regular pickup. A number of accessories, including side wall extensions, roll tarp kits, a removable tailgate spreader, and a cab guard are also available. For more information, and to see our complete line of DumperDogg products and accessories, visit https://www.buyersproducts.com/catalo.... Available Models (Click the link for more info): Stainless Steel Models - https://bit.ly/2JeNRqT 5534000 - 8 Foot 5534006 - 6 Foot Carbon Steel Models - https://bit.ly/2xO43q4 5531000 - 8 Foot 5531006 - 6 Foot Poly Model - https://bit.ly/2Fd5fIo 5532000 - 8 Foot

3/22/20

F150 Factory Tour | How Ford Builds An F-150 Every 53 Seconds - The Haul


Justin's At Ford's F150 plant to see how the best truck on earth is built from start to finish. Ford's massive F150 plant is able to crank out an F150 every 53 seconds which helps satisfy the huge demand for the best selling truck on earth.

3/21/20

Harbor Service Body for the Colorado Mid-Size Truck


Harbor Truck Bodies builds a service body specifically designed for the Chevrolet Colorado truck chassis. Now you can get your work done more efficiently and in less of a footprint.

Learn more at HarborTruckandVan.com or call Harbor Truck Bodies at 800-433-9452

3/19/20

Nissan TITAN vs TITAN XD Truck Comparison


What's the difference between TITAN and TITAN XD pickup trucks? Compare engines, towing capacity and all key features of the TITAN lineup here: https://www.nissanusa.com/vehicles/tr...

Both Trucks come equipped with a rugged leaf spring suspension with a high capacity rear axle and commercial differential. But the 2017 Nissan TITAN XD frame is larger and extensively reinforced for added strength and stiffness, which helps resist vertical and lateral bending and increases torsional rigidity. Both Nissan trucks come with rack and pinion steering and trailer brake and sway control.

3/18/20

OFF-ROAD READY: 2021 CANYON LINEUP INTRODUCES FIRST EVER AT4


When you want a small truck that helps you get away from it all, the new 2021 GMC Canyon doesn’t just give you great capability, it also gives you a premium experience that’s right for any adventure ─ especially now with the First Ever Canyon AT4.

Possessing a high level of craftsmanship and purposeful engineering to hit the dirt, Canyon AT4 (Preproduction models shown throughout. Actual production models may vary. AT4 model throughout shown with available accessory.) joins another new trim, Canyon Elevation, and the iconic Canyon Denali for a lineup that truly embodies authentic GMC premium quality with uncompromising power. Each has unique embellishments inside and out, such as Canyon Elevation’s new High Elevation package, AT4’s rugged off-road elements and Denali’s top-of the-line comfort.

So regardless of your choice, 2021 Canyon offers the exceptional capability and premium comfort that comes from being a genuine GMC pickup.

CANYON AT4

Turning off pavement and onto dirt with confidence, the 2021 Canyon AT4 has the authentic off-road capability rooted in the AT4 brand.

With a dark, bold appearance, the exterior includes signature AT4 badging and design elements like the red recovery hooks†, and black chrome grille and grille surround. The look is accentuated further by 31-inch Goodyear® Wrangler DuraTrac tires for gripping rugged terrain, and unique 17-inch aluminum wheels.

Learn more at:  https://www.gmc.com/gmc-life/trucks/2021-canyon-lineup-introduces-first-ever-at4#off-road

3/17/20

FORD MARKS 35 YEARS OF COMMERCIAL VEHICLE LEADERSHIP; FORD E-SERIES, FORD F-650 AND F-750 UPGRADED WITH NEW OPTIONS



  • Ford marks 35 years of commercial vehicle leadership by adding more customer-driven options, including gaseous fuel prep package for vehicles powered by its new 7.3-liter V8 gasoline engine
  • Fleet and commercial customers can now order all-new 2021 Ford F-600 Super Duty chassis cab – available Summer 2020
  • Fresh off their best sales in more than 20 years, Ford F-650 and F-750 Medium Duty trucks get more versatile than ever with an available air compressor that lets customers combine the cost savings of a gasoline powertrain with the stopping power of air brakes
  • New flex fuel capability for Ford E-Series offers fleets an affordable option for meeting alternative fuel requirements
INDIANAPOLIS, March 2020 – Ford marks 35 years as the country’s best-selling line of commercial vehicles* by adding even more customer-driven options to its F-650 and F-750 Medium Duty trucks and E-Series cutaway and stripped chassis.
“We are just as passionate about the success of our customers’ businesses as they are,” said Mark Buzzell, Ford director of fleet, lease and remarketing operations. “So, we have devoted decades to developing deep insights into their wants and needs. This focus has led us to create a winning portfolio of commercial vehicles that our customers love and rely on every day.”
One of Ford’s latest innovations, the all-new F-600 Super Duty chassis cab is now available to order. Ford F-600 delivers the capability of a Class 6 truck in a familiar Class 5 package, giving a new choice to fleets and vocational customers who need additional payload or want to mount heavier upfits without moving into a bigger truck. It will be available for delivery Summer 2020.
For customers who prefer alternative fuels, Ford is offering a gaseous fuel prep package for its new 7.3-liter V8 gasoline engine in current model year Super Duty F-450, F-550 and F-600 chassis cab, Medium Duty, E-Series and F-53 and F-59 stripped chassis vehicles. The package includes upgraded valvetrain components to withstand higher operating temperatures and lower lubricity of gaseous fuels so the vehicle can be converted by a Ford Qualified Vehicle Modifier to run on CNG or propane.

Air power offered for Medium DutyFord sold more of its biggest work trucks last year than it has since 1997. Sales of F-650 and F-750 are up 37 percent year-over-year, with total volume of 16,510 trucks for 2019. Building on this momentum, Ford further enhances the versatility of its Medium Duty trucks for model year 2022 with a new option for the available 7.3-liter gas engine.
For the first time, an integrated air compressor will be available for the 7.3-liter engine. The compressor can be used to power air brakes, air suspension and other accessories like air horns or air ride seats. Currently, air brakes are only available on diesel-powered trucks.
Ford is the only manufacturer offering a choice of gasoline or diesel engine for Class 6-7 conventional cab trucks – its 7.3-liter gas V8 or updated 6.7-liter Power Stroke diesel V8.
Ford Medium Duty trucks with the 7.3-liter gas engine can cost up to $9,245*** less than those with the 6.7-liter diesel. They are recommended for applications with lighter duty cycles, annual mileage and torque requirements. Adding the air compressor to the 7.3-liter engine lets customers combine the cost savings of a gasoline powertrain with the stopping power of air brakes.
“We expect this new offering to be popular in several vocational segments including propane delivery, municipalities, utilities and tree service,” explains Nathan Oscarson, Ford commercial truck brand manager. “Many customers have told us they’d like to take advantage of the cost savings provided by a gas truck, but they also want the peace of mind provided by air brakes.”
Ford E-Series gets more flexible, but passengers don’t have toFleets looking for an affordable solution to meeting alternative fuel goals will see new choices with 2022 E-Series cutaways and stripped chassis as Ford adds available flex fuel capability for the 7.3-liter V8 gasoline engine in both premium and economy calibrations. E-Series with flex fuel capability can run on gasoline or blends of up to 85 percent ethanol, or E85. Ford expects this to be a popular option for state and federal fleets.
Also new for E-Series cutaway next year is a scalloped engine access cover that provides additional legroom, in response to customer requests primarily from the recreational vehicle industry. E-Series is the most popular platform for Class C motorhomes, with 58 percent market share**.
Production of 2022 Ford F-650, F-750 and E-Series begins in January at Ohio Assembly Plant.
*Based on IHS Markit calendar year 1985-2019 TIPNet Registrations excluding registrations to individuals. TIP Registrations prior to 2010 do not include all GVW 1 and 2 vehicles.
**According to calendar year 2019 data from Statistical Surveys Inc., a market analysis company specializing in the RV, marine and manufactured housing industries.
***Based on 2021 F-650 gas versus diesel in CVT, base truck MSRP difference, with no options or add on. 7.3-liter V8 gas engine: $59,810 6.7-liter Power Stroke V8 diesel: $69,055

3/16/20

NTEA Work Truck Show 2020 Booth Highlights


The Buyers Products booth is always a hot spot at the Work Truck Show hosted by the NTEA, and this year the team went all out to make it the best it's ever been. With a mind blowing amount of bold new videos and displays, it was a must-see stop for any show-goer walking the floor.

Thank you to everyone who stopped by the booth. We hope you had a great experience and were inspired by the exciting new equipment we have in the works.

In case you missed it, here's a rundown of the biggest announcements from the 2020 Work Truck show:

• New SnowDogg® XPII Next Generation Expanding Wing Snow Plow (
https://bit.ly/2WjB8bx)
• RapidLink™ Attachment System on all SnowDogg pickup truck snow plows (
https://youtu.be/LHJj2KIiOLU)
• New SnowDogg Super J Municipal Snow Plows (
https://bit.ly/2W9A1e8)
• Newly redesigned crossover truck tool boxes (
https://bit.ly/38IER4D)
• New expanded line of landscape trailer racks and accessories (
https://bit.ly/38Kt9GV)
• New line of WideOpen™ Step Boxes for Class 8 trucks (
https://bit.ly/33jT2Mz)

3/15/20

Ranger Design Fold Away Shelving


Ranger Design’s Fold-Away foldable van shelving system is:
- Lightweight & Strong
- Silent & Rattle-Free
- Safe & Simple to Install
Find out more here:
https://rangerdesign.com/products/?ca...

All-Electric F-150 Prototype: Tows 1M+ Pounds | F-150 | Ford


We’ve confirmed we are bringing an all-electric F-150 to market. Now, we’re showing you the capability you asked for by having it tow more than 1 million pounds.* This is Built Ford Tough.

*The F-150 battery-electric prototype is towing far beyond any production truck’s published capacity in a one-time short event demonstration. Never tow beyond a vehicle’s towing capacities. Always consult the Owner’s Manual.

Learn more about the All-Electric Ford F-150 Prototype here:
https://ford.to/32L24kS

3/14/20

2020 Nissan TITAN Exterior Lighting Accessories


Give your Nissan TITAN even more style and late-night  flair with Genuine Nissan Accessories that are tested, proven, and backed up by a factory warranty. Light yours up now: https://www.nissanusa.com/vehicles/tr...

3/13/20

Find the Right Van Accessories for Your Work Van

Find your Work Van with the Most Useful Van Accessories

An Upfit Package with Ranger Design


Getting the most from your work van is easy when you choose the right van accessories to help you become more organized and efficient. Good truck and van accessories will always pay for themselves by allowing you to maximize your cargo space and productivity, while also keeping your most expensive equipment protected.
With so many van accessories to choose from, the best way to find which ones work for you is to take some time to consider your needs. All tradesmen work differently, and every trade has their own basic tools. Make a list of all the equipment that you use daily. Consider ladders, large and small parts, and inventory. With a list in hand, you’ll be able to visualize your needs and determine which of the van accessories below will be the most beneficial.

Van Accessories for Organization:

Paper holdersbottle holders and reel holders are designed to increase organization by giving you a specific spot to store your equipment. Instead of rolling loose on the floor, your bottles and reels can be fastened down and within easy reach from the door. As for your paperwork and files, keep them all together in a paper holder where they won’t get ripped or crumpled.
Partskeepers are a great way to keep your smallest parts together and secured. With small, dividable bins, they offer a great storage system to take with you onto the job site. Sturdy yet lightweight, you can never have too many Partskeepers for your tools.
Storage bins are available in several sizes, and can be accessorized with bin dividers. These are ideal for holding items and inventory so you can find what you need quickly and easily. Like the Partskeepers, if you have many items to carry with you on the job, then these bins are the ideal solution.
Hooks come in several different styles and can be used to organize tools and equipment near the van doors to be most effective. Hard hat holders can keep frequently used hats within easy reach and safely stowed while on the road.

Van Accessories for Driver Comfort & Safety:

Lighting keeps the cargo space bright, making it easy to find your tools, no matter what time of day or night. It also eliminates any chance of receiving cuts and bruises when searching through your tools in the dark.
Rear Steps are extremely beneficial for tradesmen with high roof vans. Climbing in and out several times a day can put quite a strain on your legs and back, especially when carrying heavy items at the same time. The steps also provide a rugged grip in the winter, so there is no fear of slipping when getting in or out.
Grab Handles, like the rear steps, are designed to provide you with easier access into your van. Whether installed in a high roof of low roof work van, it is always useful to have something to hold onto. It can also be used to tie down additional cargo for safe transportation.
Flettner vents help protect you from any gasses/vapors or smells that may build up in the cargo area of your vehicle. It helps reduce heat build-up and allows moisture to escape should any materials or tools be stored while they are still wet. It is a simple way to stay healthy while working.
For more products to enhance driver comfort and safety, check out our Safety Equipment blog.
Van Accessories for Vehicle Security:
Lockable Doors and Drawers provide two advantages. They can better protect your inventory and tools by keeping them in one place on the rougher roads. Also, they can deter thieves and protect valuable tools while you’re on the job and your work van is left unattended.
Wire grills for your windows can also protect you against theft as well as prevent damage to the van during loading or unloading. They are an easy install and such a simple product that just might help save you a lot of money in the future.
Seat Covers help keep your work van seats clean and in good condition. Instead of getting dirt and grease on your seats and staining them permanently, use custom-fit covers that can be easily removed and washed. Come time to sell your vehicle, you will be grateful you kept them in such good condition.
Learn other simple tricks to help Safeguard Your Work Van Against Tool Theft.
Consider the demands of your trade and your needs, and invest in the van accessories that will pay for themselves with the time and money they save.

For more info call us today at (800) 565-5321, contact a product specialist or request a quote.
Learn more at: https://rangerdesign.com

Safe Fleet Work Truck Show 2020



Safe Fleet has unified an unrivaled portfolio of best-of-breed smart solutions into an integrated safety platform for fleets of every type – School Bus, Transit, Fire, EMS, Law Enforcement, Work Truck, Truck & Trailer, Waste & Recycling, Industrial, and Military.

Through its advanced technology group, Safe Fleet continues to innovate and deliver the smart solutions that fleets will need to survive and thrive in a changing world. With centers of excellence across the US and Canada, we’re driving safety forward for today’s and tomorrow’s fleets.

With our broad portfolio of market-leading safety brands, 1,600 employees, and 14 manufacturing locations across North America, also serving Europe, Asia and the rest of the globe, we’re poised to change the way the world thinks about fleet safety.

At Safe Fleet we’re driving safety forward.

3/12/20

WALTCO Lift Corp. Press Conference -WTS 2020


At a press conference held during WTS20, company representatives discuss Waltco ingenuity, plus final-mile solutions to bridge the gap in the road. Learn more at www.worktruckshow.com/live.

3/11/20

2020 Isuzu NTEA Presser


Isuzu Commercial Truck of America introduces two new gas engines.

Knapheide Combo Body at the 2020 Work Truck Show


Featuring the all-new Combo Body at The Work Truck Show from Knapheide is the perfect combination of our popular Service Body and Platform Body. #ComboBody #WorkTrucks2020 #Knapheide #NEVERSETTLE

3/09/20

2021 GMC Canyon Introduces AT4, Elevates Denali

Updated styling and first-ever AT4 position Canyon
 for continued success, while broadening appeal in premium midsize segment 


VAIL, Colo. — The new 2021 GMC Canyon was revealed in the mountains of Colorado today, including a first-ever Canyon AT4 aimed squarely at premium midsize truck customers who purchase their trucks to venture off-road. The AT4 brings capability and appeal to the updated Canyon range.
“The new 2021 Canyon AT4 broadens the appeal to midsize truck customers who live an active lifestyle,” said Duncan Aldred, vice president of Global Buick and GMC. “Much like the Sierra AT4 has attracted new customers from outside GMC, the Canyon AT4 will attract outdoor enthusiasts looking for a premium midsize truck to GMC with the capability, technology and refinement they’ve come to expect.”
First-Ever Canyon AT4
The Canyon AT4 advances the brand’s commitment to offering premium off-road capable vehicles with impressive styling details. Bolder exterior design is defined by dark chrome finishes, with a new larger grille design and red recovery hooks. The interior features premium detailing, including unique Kalahari stitching and AT4 headrest embroidery which brings the Canyon interior design in-line with its stablemates.
Added off-road confidence comes from standard equipment, including:
  • Greater capability from 31-inch Goodyear Wrangler DuraTrac® tires fitted to 17-inch aluminum wheels
  • Off-road tuned suspension with Advanced Hill Descent Control System
  • Four-wheel drive system with Eaton G80 Rear Automatic Locking Differential
  • Transfer case skid plate providing additional protection when traveling off the beaten path
“This is a truck created with outdoor adventurers in mind,” said Aldred. “The Canyon AT4 is a perfect complement to the driver’s other passions and appreciation of the details, whether that’s a mountain bike, a snowboard or their truck.”
Refined Canyon Denali
GMC designers enhanced the iconic Denali grille with a more sculpted and layered pattern. Coupled with 5-inch chrome assist steps, signature chrome accents and Denali-exclusive 20-inch Diamond Cut aluminum wheels, the new Canyon Denali is modernized with a new look similar to the new Sierra and Sierra HD trucks.
“Denali represents GMC’s bold design philosophy and these changes further elevate the Canyon from the mainstream competition, while delivering a modern look for the customer,” said Holt Ware, director of GMC exterior design. “It features a more distinctive and sophisticated design that has become synonymous with Denali.”
Interior refinements include authentic open-pore ash wood trim, aluminum decor and unique stitching. A new Cocoa/Dark Atmosphere color theme further elevates the Denali interior and gives customers more options. Standard heated and ventilated front seats with a heated steering wheel increase driver comfort.
The new Canyon Denali and AT4 are powered by a best-in-class 308 horsepower (230 kW) 3.6L V6 engine. Additional power comes from an available 2.8L Diesel engine, offering 369 lb-ft (500 Nm) of torque.
The new 2021 GMC Canyon is built at GM’s Wentzville Assembly Center in Wentzville, Missouri.* The 2021 Canyon will be available later this year, with pricing announced closer to production.
About GMC
With a strong foundation of manufacturing trucks since 1902 and now selling in a dozen countries across the world, GMC offers purpose-built vehicles designed and engineered to the highest standard. From the all-new compact SUV Terrain to the Sierra HD, our trucks and crossovers deliver GMC’s signature combination of intuitive technologies and premium execution, with the popular Denali sub-brand representing the pinnacle of GMC design, performance and amenities. Details on all GMC models are available at www.gmc.com, on Twitter at @GMC or at www.facebook.com/gmc.