6/13/22

Highway Products | Truckslide™ XT-2000 It's How We Build It


Truckslide™ XT-2000
Built for rugged work conditions
• 2,000 pound capacity
• 1/8” fully formed aluminum tray – no welds or weak points
• Two 10 Gauge galvanized Steel Tracks
• ¼” Steel pull handle and safety locking plungers
• Eight 2” Chrome Steel Sealed Bearings

It’s How We Build it
1. 1/8” 5052 Fully Formed Aluminum Tray
2. Two 10 ga. Galvanized Steel Tracks
3. ¼” Thick Pull Handle & Safety Plungers
4. Polished Chrome Steel Bearings

1/8” 5052 Fully Formed Aluminum Tray
1. No welds, no weak points, built to take a beating
2. Will never rust or deteriorate due to weather
3. 49” tray width for pallets & 4x8 sheets
4. 5” tall side rails with tie-down points

Two 10 ga. Galvanized Steel Tracks
1. Over-built & over-engineered for maximum weight capacity
2. Galvanized steel will never rust or deteriorate in the weather
3. Safety locking points built-in tracks
4. Tray rails glide down tracks that are secured by oversized mounting brackets

¼” Thick Pull Handle & Safety Plungers
1. Pull handle actuates rocker mechanism
2. Rocker made from 10 ga. galvanized steel that is cased in 5052 control box
3. ½” 302 stainless springs slam shut plungers into track safety locking points
4. Plungers are made from ¼” steel flat bar

Eight Chrome Steel Bearings
1. Each track contains four 2” sealed, vertically positioned, radial bearings
2. Each track also contains two .875 inch sealed, laterally positioned, radial bearings
3. Each 2” bearing has a dynamic load capacity of 3,600 lbs
4. Bearings are self-lubricated and sealed to protect from dust and contamination

No comments: